# Technical Details – Porcelain White Cone 6 Casting Slip
| Property | Typical Value / Specification |
| ————————– | ——————————————————————– |
| Product Type | Ready-to-use porcelain casting slip |
| Colour | White |
| Firing Range | Cone 5–6 |
| Recommended Glaze Firing | Cone 6 |
| Approx. Firing Temperature | 1185–1220°C |
| Specific Gravity | Approx. **1.75** |
| Application | Plaster mould slip casting |
| Consistency | Smooth, creamy and free-flowing |
| Surface | Fine and smooth |
| Green Strength | Good handling strength |
| Casting Behaviour | Designed for uniform wall formation and easy draining |
| Glaze Compatibility | Suitable for transparent and coloured glazes |
| Recommended Use | Tableware, mugs, bowls, vases, decorative ware and detailed castings |
## Processing Recommendation
Stir the slip thoroughly before use without introducing excessive air. Check the specific gravity and flow before casting. Keep the container closed when not in use to minimise evaporation and changes in slip consistency.
Casting time will depend on mould condition, mould dryness, wall thickness required and ambient conditions.
Before using the slip, mix thoroughly with a hand mixer for approximately 10 minutes to ensure uniform consistency and proper dispersion.
Avoid introducing excessive air while mixing. After mixing, allow the slip to settle briefly if required and then proceed with casting into a clean, dry plaster mould.
There are no reviews yet.